Lock Nuts

Flange spanner Application: A flange spanner is used to remove the outer flange on an angle grinder to replace or change the abrasive grinding disc. The measurements of the pins on the flange spanner is: 35 x Ø4mm....

Flange spanner A flange spanner is used to remove the outer flange on an angle grinder to replace or change the abrasive grinding disc. The measurements of the pins on the flange spanner is: 35 x Ø5mm....

WHEEL SPANNER 4 WAY 17/19/21/23MM 14' (350MM)....

Adjustable Pin Spanner for Angle Grinder - 15-52 x 4mm Pin Centers: 15 - 52mm Too big - too small, adjust the fit. Tork Craft's adjustable pin spanner is designed to fit most Angle grinder flange nuts and more with pin hole diameters of 4mm, ranging from 15mm-52mm centre to centre pin spacing. At the bottom end of the spanner is a flat tip allowing for easy paint can opening as well as built into the handle is a basic wrench with sizes 10,12,13,14,15,17,19mm. This 3-in-1 t..

Pin Spanner 28mm - Ø 4mm Yellow Pin spanner The pin spanner fits Makita® Ø 125mm grinder lock nuts.....

Pin Spanner 30mm - Ø 4mm White Pin spanner The pin spanner fits Bosch Ø115mm and Desoutter 308-354 locking nuts.....

Pin Spanner 32mm - Ø 5mm Black Pin spanner The pin spanner fits Black & Decker HD series and Perles 180/230mm locking nuts.....

Pin Spanner 35mm - Ø 5mm Red Pin spanner The pin spanner fits all Flexipads M14 locking nuts.....

Flat Open Ended Spanner 14 x 17mm Open ended flat spanner The spanner is used when replacing backing pads on pneumatic sanders.....

ANGLE GRINDER NUT WRENCH....

ADJUSTABLE UNIVERSAL.ANGLE GRINDER WRENCH....

QUICK ACTION NUT FASTFIX D115-150 M14....